Deutsch
Español
Français
Italiano
Nederlands
English
DC 6V 12V 24V PWM Motor Speed Controller Green Digital LED Display Regulator 8A
$6.33
712
- Return shipping will be paid by: Buyer
- Duty Cycle adjustable: 0%-100%
- The LED display the duty ratio: 0-100%
- Display range: Digit LED display is 000-100
- Model: CCM5D
- Adjustable speed range: 0%-100%
- Maximum continuous output curr: 5A
- Restocking Fee: No
- Condition: NOTE: This can not be used to the brushless motor
- Item Name: Digital Display Motor Speed Controller PWM Switch
- Country/Region of Manufacture: China
- All returns accepted: Returns Accepted
- Item must be returned within: 30 Days
- PWM frequency: 16kHz
- The maximum output power: 240W
- OEM Service: Acceptable
- Brand: Unique Goods
- UPC: Does not apply
- Refund will be given as: Money Back
- MPN: Does Not Apply
Description
DC 6V 12V 24V PWM Motor Speed Controller Green Digital LED Display Regulator 8A
Features:
CCM5D DC Motor Speed Regulator controls the speed
of a DC motor by adjusting Pulse-Width-Modulated (PWM).
Large 0.56 inch 3-digit LED display numbers allow viewing
under the most adverse conditions.
The display range of 3-digit LED display is ”000”-“100”.
(For example, displayed ”066” as the picture 1, it means that the PWM output duty cycle is 66%.)
Adjustable speed range is 0%-100%.
Suitable for the DC motor (or DC load) within 5A, Peak current 8A.
Incorporate a push key. Push closed, and then push open.
Main technical parameters:
Input supply voltage: 6V-30VDC
The maximum output power: 240W
The maximum continuous output current :5A;(Peak current 8A),
The LED display the duty ratio 0-100%
PWM frequency:16kHz
Duty Cycle adjustable: 0%-100%
Item size: 3.1*1.6*0.9 inches ;
Operating instruction:
Before you attempting to wire the controller, make sure
power is off.
WARNING:
DO NOT REVERSE POSTIVE AND NEGATIVE
POWER LOADS.
THIS WILL DAMAGE THE CONTROLLER.
TO CHANGE MOTOR DIRECTION,
INTERCHANGE THE
POSITIVE
AND NEGATIVE WIRES OF MOTOR.
1. Connect wires refer to the “wiring diagram” .
2. Turn on the power, and adjust the potentiometer.
3. The LED display displays the PWM output duty cycle.
4. Push the key, the controller closed, push it again,
the controller open.
Package Including:
1 x DC Motor Speed Controller
